# source: https://raw.githubusercontent.com/GoLukeEnviro/trading-hub/f4b272b5c189235a3cdd507907942d16f2c48470/freqtrade/bots/regime-hybrid/user_data/strategies/momentum_bg15_v3_1.py """ Github_GoLukeEnviro_trading_hub__momentum_bg15_v3_1__20260602_130327 — Fix Over-Tight Stoploss (Iteration 5) Iteration 4 result: 40t | 5.0% WR | -$49.79 | SL avg -1.69% R:R = 2.07 (great!) but WR catastrophically low. ROI: 2t avg +3.50% = $6.90 | SL: 16t avg -1.69% = -$26.82 | TrailingSL: 4t avg -1.04% 18 other exits (signal/protection/force) all losses. DIAGNOSIS: ATR × 1.5 stoploss is ~1 ATR wide — a single 15m candle can stop you out. The SL tightening at +1.5% profit makes it worse: trades briefly touch +1.5%, the SL snaps to -1.2% from current rate, then normal noise triggers it. Result: R:R is perfect on paper but WR is impossibly low because trades never get to develop. The 3.5% ROI cap compounds the problem — trades need to survive long enough to reach it but the tight SL kills them first. CHANGE 24: Widen ATR-based stoploss - ATR multiplier: 1.5 → 2.5 (give trades 2.5 ATR of noise room) - Cap: 2.5% → 3.5% (allow wider SL for volatile pairs) - Static fallback: -3.5% (was -2.5%) - Expected avg SL loss: ~-2.0 to -2.5% (was -1.69%) CHANGE 25: Relax profit-based SL tightening - Remove the +1.5% profit tier entirely (was killing trades at +1.5%) - +2.5% profit tier: -1.2% from current (was -0.8%, too aggressive) - +4.0% profit tier: -0.8% from current (lock in large gains) - Only tighten SL when trade is well into profit territory CHANGE 26: Tighter ROI table - 0: 2.5% → 30m: 1.5% → 90m: 0.6% → 240m: 0 - Was: 0: 3.5% → 60m: 2.0% → 180m: 0.8% → 360m: 0 - 3.5% cap was unreachable with tight SL — trades died first - 2.5% cap with faster time decay should capture more ROI exits - Breakeven WR at 2.5% ROI / 2.0% SL ≈ 44% CHANGE 27: Adjust trailing stop - Offset: 2.5% → 1.8% (activate trailing sooner) - Trail: 1.2% → 0.8% (tighter trail to lock gains) - Protects trades reaching +1.8% with floor at +1.0% Preserved from iteration 4: - CHANGE 20: Custom stoploss enabled (ATR-based) - CHANGE 21: Candle body confirmation - CHANGE 23: RSI exit bands 80/20 - CHANGE 15-18: RSI momentum, ADX≥20, Vol>1.2x, EMA spread≥0.05% - CHANGE 10: BB expansion filter - EMA200 trend, MACD hist rising/falling, EMA alignment - FleetGuard: active | Protections: same """ import logging import sys from datetime import datetime, timedelta from typing import Optional import talib.abstract as ta from freqtrade.strategy import IStrategy, IntParameter, DecimalParameter from pandas import DataFrame sys.path.insert(0, "/freqtrade/shared") from primo_signal import primo_gate_allows from fleetguard_v1 import FleetGuard, FleetGuardConfig logger = logging.getLogger(__name__) class Github_GoLukeEnviro_trading_hub__momentum_bg15_v3_1__20260602_130327(IStrategy): INTERFACE_VERSION = 3 timeframe = "15m" can_short = True startup_candle_count = 200 # increased for EMA200 warmup # CHANGE 20: Enable ATR-based custom stoploss (was disabled!) use_custom_stoploss = True stoploss = -0.035 # -3.5% fallback (CHANGE 24: was -2.5%) # CHANGE 26: Tighter ROI — 3.5% was unreachable with ATR SL minimal_roi = { "0": 0.025, # 2.5% immediate cap "30": 0.015, # 1.5% after 30m "90": 0.006, # 0.6% after 1.5h "240": 0 # exit after 4h at cost } # CHANGE 27: Adjusted trailing — activate sooner, tighter lock-in trailing_stop = True trailing_stop_positive = 0.008 # 0.8% trail distance (was 1.2%) trailing_stop_positive_offset = 0.018 # activate at 1.8% profit (was 2.5%) trailing_only_offset_is_reached = True # ---- Hyperopt parameters ---- adx_strong_trend = IntParameter(12, 25, default=15, space="buy", optimize=True) adx_chaos_threshold = IntParameter(5, 15, default=8, space="buy", optimize=False) rsi_oversold = IntParameter(35, 55, default=50, space="buy", optimize=True) rsi_overbought = IntParameter(45, 65, default=50, space="buy", optimize=True) ema_fast_period = IntParameter(5, 15, default=8, space="buy", optimize=True) ema_slow_period = IntParameter(18, 30, default=21, space="buy", optimize=False) ema_trend_period = IntParameter(45, 60, default=50, space="buy", optimize=False) # CHANGE 4: EMA200 period as parameter ema_trend_conf_period = IntParameter(180, 220, default=200, space="buy", optimize=False) adx_period = IntParameter(10, 18, default=14, space="buy", optimize=False) risk_per_trade_pct = DecimalParameter(0.005, 0.025, default=0.015, decimals=3, space="buy", optimize=False) max_portfolio_drawdown_pct = DecimalParameter(0.10, 0.25, default=0.15, decimals=2, space="buy", optimize=False) max_daily_loss_pct = DecimalParameter(0.03, 0.08, default=0.05, decimals=2, space="buy", optimize=False) max_leverage = IntParameter(2, 5, default=5, space="buy", optimize=False) macd_fast = IntParameter(8, 16, default=12, space="buy", optimize=False) macd_slow = IntParameter(20, 30, default=26, space="buy", optimize=False) macd_signal = IntParameter(7, 12, default=9, space="buy", optimize=False) exit_rsi_long = IntParameter(65, 90, default=80, space="sell", optimize=True) # CHANGE 23: 72→80 exit_rsi_short = IntParameter(10, 35, default=20, space="sell", optimize=True) # CHANGE 23: 28→20 atr_sl_multiplier = DecimalParameter(1.0, 3.0, default=2.5, decimals=1, space="buy", optimize=False) # CHANGE 24: was 1.5 _daily_pnl = {} _strategy_starting_balance = None _emergency_stopped = False _fleetguard = FleetGuard(FleetGuardConfig( max_open_trades=4, max_open_shorts=2, max_open_longs=2, )) @property def protections(self): return [ {"method": "CooldownPeriod", "stop_duration_candles": 2}, {"method": "StoplossGuard", "lookback_period_candles": 24, "trade_limit": 3, "stop_duration_candles": 8, "only_per_pair": False, "only_per_side": True}, {"method": "MaxDrawdown", "lookback_period_candles": 48, "trade_limit": 10, "stop_duration_candles": 12, "max_allowed_drawdown": 0.06}, {"method": "LowProfitPairs", "lookback_period_candles": 24, "trade_limit": 3, "stop_duration_candles": 12, "required_profit": -0.01, "only_per_pair": True, "only_per_side": True}, ] def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame: try: dataframe["rsi"] = ta.RSI(dataframe, timeperiod=14) dataframe["ema_fast"] = ta.EMA(dataframe, timeperiod=self.ema_fast_period.value) dataframe["ema_slow"] = ta.EMA(dataframe, timeperiod=self.ema_slow_period.value) dataframe["ema_trend"] = ta.EMA(dataframe, timeperiod=self.ema_trend_period.value) # CHANGE 4: EMA200 for trend confirmation dataframe["ema200"] = ta.EMA(dataframe, timeperiod=self.ema_trend_conf_period.value) dataframe["adx"] = ta.ADX(dataframe, timeperiod=self.adx_period.value) macd_result = ta.MACD(dataframe, fastperiod=self.macd_fast.value, slowperiod=self.macd_slow.value, signalperiod=self.macd_signal.value) dataframe["macd"] = macd_result["macd"] dataframe["macd_signal"] = macd_result["macdsignal"] dataframe["macd_hist"] = macd_result["macdhist"] dataframe["macd_hist_rising"] = dataframe["macd_hist"] > dataframe["macd_hist"].shift(1) dataframe["regime"] = self._classify_regime(dataframe) dataframe["atr"] = ta.ATR(dataframe, timeperiod=14) # CHANGE 7: Volume SMA for entry filter dataframe["volume_sma"] = ta.SMA(dataframe["volume"], timeperiod=20) # CHANGE 10: Bollinger Band width for expansion filter bb = ta.BBANDS(dataframe, timeperiod=20, nbdevup=2.0, nbdevdn=2.0) dataframe["bb_width"] = (bb["upperband"] - bb["lowerband"]) / bb["middleband"] dataframe["bb_expanding"] = dataframe["bb_width"] > dataframe["bb_width"].shift(1) except Exception as e: logger.error(f"indicator error: {e}") dataframe["regime"] = "sideways" return dataframe def _classify_regime(self, dataframe: DataFrame) -> DataFrame: adx = dataframe["adx"] close = dataframe["close"] ema_trend = dataframe["ema_trend"] ema_fast = dataframe["ema_fast"] ema_slow = dataframe["ema_slow"] strong = self.adx_strong_trend.value chaos = self.adx_chaos_threshold.value bull = (adx > strong) & (close > ema_trend) & (ema_fast > ema_slow) bear = (adx > strong) & (close < ema_trend) & (ema_fast < ema_slow) chaos_cond = adx < chaos regime = DataFrame("sideways", index=dataframe.index, columns=["regime"]) regime.loc[bull, "regime"] = "bull" regime.loc[bear, "regime"] = "bear" regime.loc[chaos_cond, "regime"] = "chaos" return regime["regime"] def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame: try: pair = metadata.get("pair") long_gate = primo_gate_allows(pair, "long") short_gate = primo_gate_allows(pair, "short") # CHANGE 4: EMA200 trend confirmation # CHANGE 6: ADX ≥ 20 to reject weak-trend entries # CHANGE 7: Volume > 1.2x 20-SMA for liquidity confirmation # CHANGE 9: EMA alignment (fast > slow for longs, fast < slow for shorts) # CHANGE 10: BB expansion — only enter on volatility breakout # CHANGE 15: RSI momentum confirm (RSI > 50 for longs, RSI < 50 for shorts) # CHANGE 16: ADX ≥ 20 (relaxed from 25) # CHANGE 17: Volume > 1.2x SMA (relaxed from 1.5x) # CHANGE 18: EMA spread ≥ 0.05% (relaxed from 0.15%) # CHANGE 21: Candle body confirmation (close > open for longs) ema_spread = (dataframe["ema_fast"] - dataframe["ema_slow"]) / dataframe["close"] long_cond = ( (dataframe["close"] > dataframe["ema200"]) & (dataframe["adx"] >= 20) & (dataframe["volume"] > dataframe["volume_sma"] * 1.2) & (dataframe["bb_expanding"]) & (ema_spread > 0.0005) & (dataframe["ema_fast"] > dataframe["ema_slow"]) & (dataframe["rsi"] > 50) & (dataframe["rsi"] < 75) & dataframe["macd_hist_rising"] & (dataframe["close"] > dataframe["open"]) & # CHANGE 21: bullish candle long_gate ) dataframe.loc[long_cond, ["enter_long", "enter_tag"]] = (1, "v3_trend_long") short_cond = ( (dataframe["close"] < dataframe["ema200"]) & (dataframe["adx"] >= 20) & (dataframe["volume"] > dataframe["volume_sma"] * 1.2) & (dataframe["bb_expanding"]) & (ema_spread < -0.0005) & (dataframe["ema_fast"] < dataframe["ema_slow"]) & (dataframe["rsi"] < 50) & (dataframe["rsi"] > 25) & ~dataframe["macd_hist_rising"] & (dataframe["close"] < dataframe["open"]) & # CHANGE 21: bearish candle short_gate ) dataframe.loc[short_cond, ["enter_short", "enter_tag"]] = (1, "v3_trend_short") except Exception as e: logger.error(f"entry error: {e}") return dataframe def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame: try: exit_long_cond = (dataframe["rsi"] > self.exit_rsi_long.value) dataframe.loc[exit_long_cond, ["exit_long", "exit_tag"]] = (1, "v3_rsi_exit_long") exit_short_cond = (dataframe["rsi"] < self.exit_rsi_short.value) dataframe.loc[exit_short_cond, ["exit_short", "exit_tag"]] = (1, "v3_rsi_exit_short") except Exception as e: logger.error(f"exit error: {e}") return dataframe def custom_stoploss(self, pair: str, trade, current_time: datetime, current_rate: float, current_profit: float, after_fill: bool, **kwargs) -> Optional[float]: # CHANGE 25: Relax profit-based tightening tiers if current_profit > 0.040: return -0.008 # lock in large gains: SL at +3.2% from entry if current_profit > 0.025: return -0.012 # tighten moderately: SL at +1.3% from entry try: dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe) if len(dataframe) > 0: last_candle = dataframe.iloc[-1] atr_val = last_candle.get("atr", 0) if atr_val > 0 and last_candle.get("close", 0) > 0: atr_pct = atr_val / last_candle["close"] sl_distance = atr_pct * self.atr_sl_multiplier.value sl_distance = min(sl_distance, 0.035) # CHANGE 24: cap 3.5% (was 2.5%) return -sl_distance except Exception: pass return None def confirm_trade_entry(self, pair: str, order_type: str, amount: float, rate: float, time_in_force: str, current_time: datetime, entry_tag: Optional[str], side: str, **kwargs) -> bool: if self._emergency_stopped: return False open_trades = [] recent_closed = [] current_drawdown = 0.0 try: from freqtrade.persistence import Trade for t in Trade.get_trades_proxy(is_open=True): open_trades.append({"pair": t.pair, "is_short": t.is_short}) cutoff = current_time - timedelta(hours=24) for t in Trade.get_trades_proxy(is_open=False): if t.close_date and t.close_date >= cutoff: recent_closed.append({ "pair": t.pair, "is_short": t.is_short, "close_profit": t.close_profit or 0.0, }) total_profit = Trade.get_total_closed_profit() starting_balance = self.wallets.get_starting_balance() if hasattr(self, 'wallets') and self.wallets else 1000.0 if starting_balance > 0: current_drawdown = abs(min(0, total_profit / starting_balance)) except Exception as e: logger.warning(f"FleetGuard data gathering fallback: {e}") try: for t in Trade.get_trades_proxy(is_open=True): open_trades.append({"pair": t.pair, "is_short": t.is_short}) except Exception: pass allowed, reason = self._fleetguard.check_entry( pair=pair, side=side, open_trades=open_trades, recent_closed_trades=recent_closed, current_drawdown_pct=current_drawdown ) if not allowed: logger.info(f"FleetGuard REJECT: {pair} {side} — {reason}") return False return True def leverage(self, pair: str, current_time: datetime, current_rate: float, proposed_leverage: float, max_leverage: float, entry_tag: str, side: str, **kwargs) -> float: return min(self.max_leverage.value, max_leverage)