# source: https://raw.githubusercontent.com/DerSalvador/freqtrade-helm-chart/f80d4d8b77c53435e9c0a9045636f1bfb2b8c539/chart/deployed_strategies/binance-futures-k8s-namespace/NostalgiaForInfinityV4.py import freqtrade.vendor.qtpylib.indicators as qtpylib import numpy as np import talib.abstract as ta from freqtrade.strategy.interface import IStrategy from freqtrade.strategy import merge_informative_pair, DecimalParameter, IntParameter, CategoricalParameter from pandas import DataFrame from functools import reduce from freqtrade.persistence import Trade from datetime import datetime ########################################################################################################### ## Github_DerSalvador_freqtrade_helm_chart__NostalgiaForInfinityV4__20260416_110455 by iterativ ## ## ## ## Strategy for Freqtrade https://github.com/freqtrade/freqtrade ## ## ## ########################################################################################################### ## GENERAL RECOMMENDATIONS ## ## ## ## For optimal performance, suggested to use between 4 and 6 open trades, with unlimited stake. ## ## A pairlist with 40 to 80 pairs. Volume pairlist works well. ## ## Prefer stable coin (USDT, BUSDT etc) pairs, instead of BTC or ETH pairs. ## ## Highly recommended to blacklist leveraged tokens (*BULL, *BEAR, *UP, *DOWN etc). ## ## Ensure that you don't override any variables in you config.json. Especially ## ## the timeframe (must be 5m). ## ## use_exit_signal must set to true (or not set at all). ## ## exit_profit_only must set to false (or not set at all). ## ## ignore_roi_if_entry_signal must set to true (or not set at all). ## ## ## ########################################################################################################### ## DONATIONS ## ## ## ## Absolutely not required. However, will be accepted as a token of appreciation. ## ## ## ## BTC: bc1qvflsvddkmxh7eqhc4jyu5z5k6xcw3ay8jl49sk ## ## ETH (ERC20): 0x83D3cFb8001BDC5d2211cBeBB8cB3461E5f7Ec91 ## ## BEP20/BSC (ETH, BNB, ...): 0x86A0B21a20b39d16424B7c8003E4A7e12d78ABEe ## ## ## ########################################################################################################### class Github_DerSalvador_freqtrade_helm_chart__NostalgiaForInfinityV4__20260416_110455(IStrategy): INTERFACE_VERSION = 3 # # ROI table: minimal_roi = {'0': 10} stoploss = -1.0 # Trailing stoploss (not used) trailing_stop = False trailing_only_offset_is_reached = True trailing_stop_positive = 0.01 trailing_stop_positive_offset = 0.03 use_custom_stoploss = False # Optimal timeframe for the strategy. timeframe = '5m' inf_1h = '1h' # Run "populate_indicators()" only for new candle. process_only_new_candles = True # These values can be overridden in the "ask_strategy" section in the config. use_exit_signal = True exit_profit_only = False ignore_roi_if_entry_signal = True # Number of candles the strategy requires before producing valid signals startup_candle_count: int = 400 # Optional order type mapping. order_types = {'entry': 'limit', 'exit': 'limit', 'trailing_stop_loss': 'limit', 'stoploss': 'limit', 'stoploss_on_exchange': False} ############################################################# ############# # Enable/Disable conditions entry_params = {'entry_condition_1_enable': True, 'entry_condition_2_enable': True, 'entry_condition_3_enable': True, 'entry_condition_4_enable': True, 'entry_condition_5_enable': True, 'entry_condition_6_enable': True, 'entry_condition_7_enable': True, 'entry_condition_8_enable': True, 'entry_condition_9_enable': True, 'entry_condition_10_enable': True, 'entry_condition_11_enable': True, 'entry_condition_12_enable': True, 'entry_condition_13_enable': True, 'entry_condition_14_enable': True, 'entry_condition_15_enable': True, 'entry_condition_16_enable': True, 'entry_condition_17_enable': True} ############# # Enable/Disable conditions ############# exit_params = {'exit_condition_1_enable': True, 'exit_condition_2_enable': True, 'exit_condition_3_enable': True, 'exit_condition_4_enable': True, 'exit_condition_5_enable': True, 'exit_condition_6_enable': True, 'exit_condition_7_enable': True, 'exit_condition_8_enable': True} ############################################################# entry_condition_1_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_2_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_3_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_4_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_5_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_6_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_7_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_8_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_9_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_10_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_11_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_12_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_13_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_14_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_15_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_16_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) entry_condition_17_enable = CategoricalParameter([True, False], default=True, space='entry', optimize=False, load=True) # Normal dips entry_dip_threshold_1 = DecimalParameter(0.001, 0.05, default=0.02, space='entry', decimals=3, optimize=False, load=True) entry_dip_threshold_2 = DecimalParameter(0.01, 0.2, default=0.14, space='entry', decimals=3, optimize=False, load=True) entry_dip_threshold_3 = DecimalParameter(0.05, 0.4, default=0.32, space='entry', decimals=3, optimize=False, load=True) entry_dip_threshold_4 = DecimalParameter(0.2, 0.5, default=0.5, space='entry', decimals=3, optimize=False, load=True) # Strict dips entry_dip_threshold_5 = DecimalParameter(0.001, 0.05, default=0.015, space='entry', decimals=3, optimize=False, load=True) entry_dip_threshold_6 = DecimalParameter(0.01, 0.2, default=0.06, space='entry', decimals=3, optimize=False, load=True) entry_dip_threshold_7 = DecimalParameter(0.05, 0.4, default=0.24, space='entry', decimals=3, optimize=False, load=True) entry_dip_threshold_8 = DecimalParameter(0.2, 0.5, default=0.4, space='entry', decimals=3, optimize=False, load=True) # 12 hours entry_pump_pull_threshold_1 = DecimalParameter(1.5, 3.0, default=1.75, space='entry', decimals=2, optimize=False, load=True) entry_pump_threshold_1 = DecimalParameter(0.4, 1.0, default=0.46, space='entry', decimals=3, optimize=False, load=True) # 36 hours entry_pump_pull_threshold_2 = DecimalParameter(1.5, 3.0, default=1.75, space='entry', decimals=2, optimize=False, load=True) entry_pump_threshold_2 = DecimalParameter(0.4, 1.0, default=0.56, space='entry', decimals=3, optimize=False, load=True) # 48 hours entry_pump_pull_threshold_3 = DecimalParameter(1.5, 3.0, default=1.75, space='entry', decimals=2, optimize=False, load=True) entry_pump_threshold_3 = DecimalParameter(0.4, 1.0, default=0.85, space='entry', decimals=3, optimize=False, load=True) # 12 hours strict entry_pump_pull_threshold_4 = DecimalParameter(1.5, 3.0, default=2.2, space='entry', decimals=2, optimize=False, load=True) entry_pump_threshold_4 = DecimalParameter(0.4, 1.0, default=0.4, space='entry', decimals=3, optimize=False, load=True) # 36 hours strict entry_pump_pull_threshold_5 = DecimalParameter(1.5, 3.0, default=2.0, space='entry', decimals=2, optimize=False, load=True) entry_pump_threshold_5 = DecimalParameter(0.4, 1.0, default=0.56, space='entry', decimals=3, optimize=False, load=True) # 48 hours strict entry_pump_pull_threshold_6 = DecimalParameter(1.5, 3.0, default=2.0, space='entry', decimals=2, optimize=False, load=True) entry_pump_threshold_6 = DecimalParameter(0.4, 1.0, default=0.68, space='entry', decimals=3, optimize=False, load=True) entry_min_inc_1 = DecimalParameter(0.01, 0.05, default=0.022, space='entry', decimals=3, optimize=False, load=True) entry_rsi_1h_min_1 = DecimalParameter(25.0, 40.0, default=30.0, space='entry', decimals=1, optimize=False, load=True) entry_rsi_1h_max_1 = DecimalParameter(70.0, 90.0, default=80.0, space='entry', decimals=1, optimize=False, load=True) entry_rsi_1 = DecimalParameter(20.0, 40.0, default=36.0, space='entry', decimals=1, optimize=False, load=True) entry_mfi_1 = DecimalParameter(20.0, 56.0, default=26.0, space='entry', decimals=1, optimize=False, load=True) entry_volume_2 = DecimalParameter(1.0, 10.0, default=2.0, space='entry', decimals=1, optimize=False, load=True) entry_rsi_1h_min_2 = DecimalParameter(30.0, 40.0, default=36.0, space='entry', decimals=1, optimize=False, load=True) entry_rsi_1h_max_2 = DecimalParameter(70.0, 95.0, default=90.0, space='entry', decimals=1, optimize=False, load=True) entry_rsi_1h_diff_2 = DecimalParameter(30.0, 50.0, default=34.0, space='entry', decimals=1, optimize=False, load=True) entry_mfi_2 = DecimalParameter(30.0, 65.0, default=56.0, space='entry', decimals=1, optimize=False, load=True) entry_bb_offset_2 = DecimalParameter(0.97, 0.99, default=0.983, space='entry', decimals=3, optimize=False, load=True) entry_bb40_bbdelta_close_3 = DecimalParameter(0.005, 0.06, default=0.057, space='entry', optimize=False, load=True) entry_bb40_closedelta_close_3 = DecimalParameter(0.01, 0.03, default=0.023, space='entry', optimize=False, load=True) entry_bb40_tail_bbdelta_3 = DecimalParameter(0.15, 0.45, default=0.418, space='entry', optimize=False, load=True) entry_ema_rel_3 = DecimalParameter(0.97, 0.999, default=0.988, space='entry', decimals=3, optimize=False, load=True) entry_bb20_close_bblowerband_4 = DecimalParameter(0.9, 0.99, default=0.979, space='entry', optimize=False, load=True) entry_bb20_volume_4 = IntParameter(16, 35, default=18, space='entry', optimize=False, load=True) entry_volume_5 = DecimalParameter(1.0, 10.0, default=6.0, space='entry', decimals=1, optimize=False, load=True) entry_ema_open_mult_5 = DecimalParameter(0.016, 0.03, default=0.019, space='entry', decimals=3, optimize=False, load=True) entry_bb_offset_5 = DecimalParameter(0.98, 1.0, default=0.999, space='entry', decimals=3, optimize=False, load=True) entry_ema_rel_5 = DecimalParameter(0.97, 0.999, default=0.988, space='entry', decimals=3, optimize=False, load=True) entry_volume_6 = DecimalParameter(1.0, 10.0, default=1.5, space='entry', decimals=1, optimize=False, load=True) entry_ema_open_mult_6 = DecimalParameter(0.03, 0.04, default=0.025, space='entry', decimals=3, optimize=False, load=True) entry_bb_offset_6 = DecimalParameter(0.98, 0.999, default=0.995, space='entry', decimals=3, optimize=False, load=True) entry_volume_7 = DecimalParameter(1.0, 10.0, default=2.0, space='entry', decimals=1, optimize=False, load=True) entry_ema_open_mult_7 = DecimalParameter(0.02, 0.04, default=0.03, space='entry', decimals=3, optimize=False, load=True) entry_rsi_7 = DecimalParameter(24.0, 50.0, default=36.0, space='entry', decimals=1, optimize=False, load=True) entry_rsi_8 = DecimalParameter(30.0, 50.0, default=46.0, space='entry', decimals=1, optimize=False, load=True) entry_ema_rel_8 = DecimalParameter(0.97, 0.999, default=0.988, space='entry', decimals=3, optimize=False, load=True) entry_volume_9 = DecimalParameter(1.0, 4.0, default=2.0, space='entry', decimals=2, optimize=False, load=True) entry_ma_offset_9 = DecimalParameter(0.94, 0.99, default=0.958, space='entry', decimals=3, optimize=False, load=True) entry_bb_offset_9 = DecimalParameter(0.97, 0.99, default=0.984, space='entry', decimals=3, optimize=False, load=True) entry_rsi_1h_min_9 = DecimalParameter(26.0, 40.0, default=30.0, space='entry', decimals=1, optimize=False, load=True) entry_rsi_1h_max_9 = DecimalParameter(70.0, 90.0, default=80.0, space='entry', decimals=1, optimize=False, load=True) entry_mfi_9 = DecimalParameter(36.0, 65.0, default=56.0, space='entry', decimals=1, optimize=False, load=True) entry_volume_10 = DecimalParameter(1.0, 26.0, default=23.0, space='entry', decimals=1, optimize=False, load=True) entry_ma_offset_10 = DecimalParameter(0.93, 0.97, default=0.94, space='entry', decimals=3, optimize=False, load=True) entry_bb_offset_10 = DecimalParameter(0.97, 0.99, default=0.994, space='entry', decimals=3, optimize=False, load=True) entry_rsi_1h_10 = DecimalParameter(20.0, 40.0, default=39.0, space='entry', decimals=1, optimize=False, load=True) entry_ma_offset_11 = DecimalParameter(0.93, 0.99, default=0.938, space='entry', decimals=3, optimize=False, load=True) entry_min_inc_11 = DecimalParameter(0.005, 0.05, default=0.01, space='entry', decimals=3, optimize=False, load=True) entry_rsi_1h_min_11 = DecimalParameter(40.0, 60.0, default=55.0, space='entry', decimals=1, optimize=False, load=True) entry_rsi_1h_max_11 = DecimalParameter(70.0, 90.0, default=82.0, space='entry', decimals=1, optimize=False, load=True) entry_rsi_11 = DecimalParameter(30.0, 48.0, default=46.0, space='entry', decimals=1, optimize=False, load=True) entry_mfi_11 = DecimalParameter(36.0, 56.0, default=38.0, space='entry', decimals=1, optimize=False, load=True) entry_volume_12 = DecimalParameter(1.0, 10.0, default=2.0, space='entry', decimals=1, optimize=False, load=True) entry_ma_offset_12 = DecimalParameter(0.93, 0.97, default=0.936, space='entry', decimals=3, optimize=False, load=True) entry_rsi_12 = DecimalParameter(26.0, 40.0, default=30.0, space='entry', decimals=1, optimize=False, load=True) entry_ewo_12 = DecimalParameter(2.0, 6.0, default=2.8, space='entry', decimals=1, optimize=False, load=True) entry_ma_offset_13 = DecimalParameter(0.93, 0.98, default=0.952, space='entry', decimals=3, optimize=False, load=True) entry_ewo_13 = DecimalParameter(-14.0, -7.0, default=-7.9, space='entry', decimals=1, optimize=False, load=True) entry_volume_14 = DecimalParameter(1.0, 10.0, default=2.0, space='entry', decimals=1, optimize=False, load=True) entry_ema_open_mult_14 = DecimalParameter(0.01, 0.03, default=0.014, space='entry', decimals=3, optimize=False, load=True) entry_bb_offset_14 = DecimalParameter(0.98, 1.0, default=0.992, space='entry', decimals=3, optimize=False, load=True) entry_ma_offset_14 = DecimalParameter(0.93, 0.99, default=0.998, space='entry', decimals=3, optimize=False, load=True) entry_ema_open_mult_15 = DecimalParameter(0.02, 0.04, default=0.026, space='entry', decimals=3, optimize=False, load=True) entry_ma_offset_15 = DecimalParameter(0.93, 0.99, default=0.985, space='entry', decimals=3, optimize=False, load=True) entry_rsi_15 = DecimalParameter(30.0, 50.0, default=32.0, space='entry', decimals=1, optimize=False, load=True) entry_ema_rel_15 = DecimalParameter(0.97, 0.999, default=0.988, space='entry', decimals=3, optimize=False, load=True) entry_volume_16 = DecimalParameter(1.0, 10.0, default=2.0, space='entry', decimals=1, optimize=False, load=True) entry_ma_offset_16 = DecimalParameter(0.93, 0.97, default=0.95, space='entry', decimals=3, optimize=False, load=True) entry_rsi_16 = DecimalParameter(26.0, 50.0, default=38.0, space='entry', decimals=1, optimize=False, load=True) entry_ewo_16 = DecimalParameter(4.0, 8.0, default=3.6, space='entry', decimals=1, optimize=False, load=True) entry_ma_offset_17 = DecimalParameter(0.93, 0.98, default=0.958, space='entry', decimals=3, optimize=False, load=True) entry_ewo_17 = DecimalParameter(-18.0, -10.0, default=-12.0, space='entry', decimals=1, optimize=False, load=True) # Sell exit_condition_1_enable = CategoricalParameter([True, False], default=True, space='exit', optimize=False, load=True) exit_condition_2_enable = CategoricalParameter([True, False], default=True, space='exit', optimize=False, load=True) exit_condition_3_enable = CategoricalParameter([True, False], default=True, space='exit', optimize=False, load=True) exit_condition_4_enable = CategoricalParameter([True, False], default=True, space='exit', optimize=False, load=True) exit_condition_5_enable = CategoricalParameter([True, False], default=True, space='exit', optimize=False, load=True) exit_condition_6_enable = CategoricalParameter([True, False], default=True, space='exit', optimize=False, load=True) exit_condition_7_enable = CategoricalParameter([True, False], default=True, space='exit', optimize=False, load=True) exit_condition_8_enable = CategoricalParameter([True, False], default=True, space='exit', optimize=False, load=True) exit_rsi_bb_1 = DecimalParameter(60.0, 80.0, default=79.5, space='exit', decimals=1, optimize=False, load=True) exit_rsi_bb_2 = DecimalParameter(72.0, 90.0, default=81, space='exit', decimals=1, optimize=False, load=True) exit_rsi_main_3 = DecimalParameter(77.0, 90.0, default=82, space='exit', decimals=1, optimize=False, load=True) exit_dual_rsi_rsi_4 = DecimalParameter(72.0, 84.0, default=73.4, space='exit', decimals=1, optimize=False, load=True) exit_dual_rsi_rsi_1h_4 = DecimalParameter(78.0, 92.0, default=79.6, space='exit', decimals=1, optimize=False, load=True) exit_ema_relative_5 = DecimalParameter(0.005, 0.05, default=0.024, space='exit', optimize=False, load=True) exit_rsi_diff_5 = DecimalParameter(0.0, 20.0, default=4.382, space='exit', optimize=False, load=True) exit_rsi_under_6 = DecimalParameter(72.0, 90.0, default=79.0, space='exit', decimals=1, optimize=False, load=True) exit_rsi_1h_7 = DecimalParameter(80.0, 95.0, default=81.7, space='exit', decimals=1, optimize=False, load=True) exit_bb_relative_8 = DecimalParameter(1.05, 1.3, default=1.1, space='exit', decimals=3, optimize=False, load=True) exit_custom_profit_0 = DecimalParameter(0.01, 0.1, default=0.01, space='exit', decimals=3, optimize=False, load=True) exit_custom_rsi_0 = DecimalParameter(30.0, 40.0, default=30.0, space='exit', decimals=3, optimize=False, load=True) exit_custom_profit_1 = DecimalParameter(0.01, 0.1, default=0.03, space='exit', decimals=3, optimize=False, load=True) exit_custom_rsi_1 = DecimalParameter(30.0, 50.0, default=36.0, space='exit', decimals=2, optimize=False, load=True) exit_custom_profit_2 = DecimalParameter(0.01, 0.1, default=0.05, space='exit', decimals=3, optimize=False, load=True) exit_custom_rsi_2 = DecimalParameter(34.0, 50.0, default=43.0, space='exit', decimals=2, optimize=False, load=True) exit_custom_profit_3 = DecimalParameter(0.06, 0.3, default=0.08, space='exit', decimals=3, optimize=False, load=True) exit_custom_rsi_3 = DecimalParameter(38.0, 55.0, default=48.0, space='exit', decimals=2, optimize=False, load=True) exit_custom_profit_4 = DecimalParameter(0.3, 0.6, default=0.25, space='exit', decimals=3, optimize=False, load=True) exit_custom_rsi_4 = DecimalParameter(40.0, 58.0, default=50.0, space='exit', decimals=2, optimize=False, load=True) exit_custom_under_profit_1 = DecimalParameter(0.01, 0.1, default=0.02, space='exit', decimals=3, optimize=False, load=True) exit_custom_under_profit_2 = DecimalParameter(0.01, 0.1, default=0.035, space='exit', decimals=3, optimize=False, load=True) exit_custom_under_profit_3 = DecimalParameter(0.05, 0.2, default=0.07, space='exit', decimals=3, optimize=False, load=True) exit_trail_profit_min_1 = DecimalParameter(0.1, 0.25, default=0.15, space='exit', decimals=3, optimize=False, load=True) exit_trail_profit_max_1 = DecimalParameter(0.3, 0.5, default=0.46, space='exit', decimals=2, optimize=False, load=True) exit_trail_down_1 = DecimalParameter(0.04, 0.2, default=0.18, space='exit', decimals=3, optimize=False, load=True) exit_trail_profit_min_2 = DecimalParameter(0.01, 0.1, default=0.01, space='exit', decimals=3, optimize=False, load=True) exit_trail_profit_max_2 = DecimalParameter(0.08, 0.25, default=0.12, space='exit', decimals=2, optimize=False, load=True) exit_trail_down_2 = DecimalParameter(0.04, 0.2, default=0.14, space='exit', decimals=3, optimize=False, load=True) ############################################################# def get_ticker_indicator(self): return int(self.timeframe[:-1]) def custom_exit(self, pair: str, trade: 'Trade', current_time: 'datetime', current_rate: float, current_profit: float, **kwargs): dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe) last_candle = dataframe.iloc[-1].squeeze() max_profit = (trade.max_rate - trade.open_rate) / trade.open_rate if last_candle is not None: if (current_profit > self.exit_custom_profit_4.value) & (last_candle['rsi'] < self.exit_custom_rsi_4.value): return 'signal_profit_4' elif (current_profit > self.exit_custom_profit_3.value) & (last_candle['rsi'] < self.exit_custom_rsi_3.value): return 'signal_profit_3' elif (current_profit > self.exit_custom_profit_2.value) & (last_candle['rsi'] < self.exit_custom_rsi_2.value): return 'signal_profit_2' elif (current_profit > self.exit_custom_profit_1.value) & (last_candle['rsi'] < self.exit_custom_rsi_1.value): return 'signal_profit_1' elif (current_profit > self.exit_custom_profit_0.value) & (last_candle['rsi'] < self.exit_custom_rsi_0.value): return 'signal_profit_0' elif (current_profit > self.exit_custom_under_profit_1.value) & (last_candle['close'] < last_candle['ema_200']): return 'signal_profit_u_1' elif (current_profit > self.exit_custom_under_profit_2.value) & last_candle['sma_200_dec']: return 'signal_profit_u_2' elif (current_profit > self.exit_custom_under_profit_3.value) & (last_candle['close'] < last_candle['ema_100']): return 'signal_profit_u_3' elif (current_profit > self.exit_trail_profit_min_1.value) & (current_profit < self.exit_trail_profit_max_1.value) & (max_profit > current_profit + self.exit_trail_down_1.value): return 'signal_profit_t_1' elif (current_profit > self.exit_trail_profit_min_2.value) & (current_profit < self.exit_trail_profit_max_2.value) & (max_profit > current_profit + self.exit_trail_down_2.value): return 'signal_profit_t_2' return None def informative_pairs(self): # get access to all pairs available in whitelist. pairs = self.dp.current_whitelist() # Assign tf to each pair so they can be downloaded and cached for strategy. informative_pairs = [(pair, '1h') for pair in pairs] return informative_pairs def informative_1h_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame: assert self.dp, 'DataProvider is required for multiple timeframes.' # Get the informative pair informative_1h = self.dp.get_pair_dataframe(pair=metadata['pair'], timeframe=self.inf_1h) # EMA informative_1h['ema_15'] = ta.EMA(informative_1h, timeperiod=15) informative_1h['ema_50'] = ta.EMA(informative_1h, timeperiod=50) informative_1h['ema_100'] = ta.EMA(informative_1h, timeperiod=100) informative_1h['ema_200'] = ta.EMA(informative_1h, timeperiod=200) # SMA informative_1h['sma_200'] = ta.SMA(informative_1h, timeperiod=200) # RSI informative_1h['rsi'] = ta.RSI(informative_1h, timeperiod=14) # BB bollinger = qtpylib.bollinger_bands(qtpylib.typical_price(informative_1h), window=20, stds=2) informative_1h['bb_lowerband'] = bollinger['lower'] informative_1h['bb_middleband'] = bollinger['mid'] informative_1h['bb_upperband'] = bollinger['upper'] # Pump protections informative_1h['safe_pump_24'] = ((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / informative_1h['close'].rolling(24).min() < self.entry_pump_threshold_1.value) | ((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / self.entry_pump_pull_threshold_1.value > informative_1h['close'] - informative_1h['close'].rolling(24).min()) informative_1h['safe_pump_36'] = ((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / informative_1h['close'].rolling(36).min() < self.entry_pump_threshold_2.value) | ((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / self.entry_pump_pull_threshold_2.value > informative_1h['close'] - informative_1h['close'].rolling(36).min()) informative_1h['safe_pump_48'] = ((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / informative_1h['close'].rolling(48).min() < self.entry_pump_threshold_3.value) | ((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / self.entry_pump_pull_threshold_3.value > informative_1h['close'] - informative_1h['close'].rolling(48).min()) informative_1h['safe_pump_24_strict'] = ((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / informative_1h['close'].rolling(24).min() < self.entry_pump_threshold_4.value) | ((informative_1h['open'].rolling(24).max() - informative_1h['close'].rolling(24).min()) / self.entry_pump_pull_threshold_4.value > informative_1h['close'] - informative_1h['close'].rolling(24).min()) informative_1h['safe_pump_36_strict'] = ((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / informative_1h['close'].rolling(36).min() < self.entry_pump_threshold_5.value) | ((informative_1h['open'].rolling(36).max() - informative_1h['close'].rolling(36).min()) / self.entry_pump_pull_threshold_5.value > informative_1h['close'] - informative_1h['close'].rolling(36).min()) informative_1h['safe_pump_48_strict'] = ((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / informative_1h['close'].rolling(48).min() < self.entry_pump_threshold_6.value) | ((informative_1h['open'].rolling(48).max() - informative_1h['close'].rolling(48).min()) / self.entry_pump_pull_threshold_6.value > informative_1h['close'] - informative_1h['close'].rolling(48).min()) return informative_1h def normal_tf_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame: # BB 40 bb_40 = qtpylib.bollinger_bands(dataframe['close'], window=40, stds=2) dataframe['lower'] = bb_40['lower'] dataframe['mid'] = bb_40['mid'] dataframe['bbdelta'] = (bb_40['mid'] - dataframe['lower']).abs() dataframe['closedelta'] = (dataframe['close'] - dataframe['close'].shift()).abs() dataframe['tail'] = (dataframe['close'] - dataframe['low']).abs() # BB 20 bollinger = qtpylib.bollinger_bands(qtpylib.typical_price(dataframe), window=20, stds=2) dataframe['bb_lowerband'] = bollinger['lower'] dataframe['bb_middleband'] = bollinger['mid'] dataframe['bb_upperband'] = bollinger['upper'] # EMA 200 dataframe['ema_12'] = ta.EMA(dataframe, timeperiod=12) dataframe['ema_20'] = ta.EMA(dataframe, timeperiod=20) dataframe['ema_26'] = ta.EMA(dataframe, timeperiod=26) dataframe['ema_50'] = ta.EMA(dataframe, timeperiod=50) dataframe['ema_100'] = ta.EMA(dataframe, timeperiod=100) dataframe['ema_200'] = ta.EMA(dataframe, timeperiod=200) # SMA dataframe['sma_5'] = ta.SMA(dataframe, timeperiod=5) dataframe['sma_30'] = ta.SMA(dataframe, timeperiod=30) dataframe['sma_200'] = ta.SMA(dataframe, timeperiod=200) dataframe['sma_200_dec'] = dataframe['sma_200'] < dataframe['sma_200'].shift(20) # MFI dataframe['mfi'] = ta.MFI(dataframe) # EWO dataframe['ewo'] = EWO(dataframe, 50, 200) # Alligator dataframe['lips'] = ta.SMA(dataframe, timeperiod=5) dataframe['smma_lips'] = dataframe['lips'].rolling(3).mean() dataframe['teeth'] = ta.SMA(dataframe, timeperiod=8) dataframe['smma_teeth'] = dataframe['teeth'].rolling(5).mean() dataframe['jaw'] = ta.SMA(dataframe, timeperiod=13) dataframe['smma_jaw'] = dataframe['jaw'].rolling(8).mean() # RSI dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14) # Dip protection dataframe['safe_dips'] = ((dataframe['open'] - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_1.value) & ((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_2.value) & ((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_3.value) & ((dataframe['open'].rolling(144).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_4.value) dataframe['safe_dips_strict'] = ((dataframe['open'] - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_5.value) & ((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_6.value) & ((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_7.value) & ((dataframe['open'].rolling(144).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_8.value) # Volume dataframe['volume_mean_4'] = dataframe['volume'].rolling(4).mean().shift(1) dataframe['volume_mean_30'] = dataframe['volume'].rolling(30).mean() return dataframe def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame: # The indicators for the 1h informative timeframe informative_1h = self.informative_1h_indicators(dataframe, metadata) dataframe = merge_informative_pair(dataframe, informative_1h, self.timeframe, self.inf_1h, ffill=True) # The indicators for the normal (5m) timeframe dataframe = self.normal_tf_indicators(dataframe, metadata) return dataframe def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame: conditions = [] conditions.append(self.entry_condition_1_enable.value & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & (dataframe['sma_200'] > dataframe['sma_200'].shift(20)) & dataframe['safe_dips'] & dataframe['safe_pump_48_1h'] & ((dataframe['close'] - dataframe['open'].rolling(36).min()) / dataframe['open'].rolling(36).min() > self.entry_min_inc_1.value) & (dataframe['rsi_1h'] > self.entry_rsi_1h_min_1.value) & (dataframe['rsi_1h'] < self.entry_rsi_1h_max_1.value) & (dataframe['rsi'] < self.entry_rsi_1.value) & (dataframe['mfi'] < self.entry_mfi_1.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_2_enable.value & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & dataframe['safe_pump_24_strict_1h'] & (dataframe['volume_mean_4'] * self.entry_volume_2.value > dataframe['volume']) & (dataframe['rsi_1h'] > self.entry_rsi_1h_min_2.value) & (dataframe['rsi_1h'] < self.entry_rsi_1h_max_2.value) & (dataframe['rsi'] < dataframe['rsi_1h'] - self.entry_rsi_1h_diff_2.value) & (dataframe['mfi'] < self.entry_mfi_2.value) & (dataframe['close'] < dataframe['bb_lowerband'] * self.entry_bb_offset_2.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_3_enable.value & (dataframe['close'] > dataframe['ema_200_1h'] * self.entry_ema_rel_3.value) & (dataframe['ema_100'] > dataframe['ema_200']) & (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & (dataframe['ema_100_1h'] > dataframe['ema_200_1h']) & dataframe['safe_pump_36_1h'] & dataframe['lower'].shift().gt(0) & dataframe['bbdelta'].gt(dataframe['close'] * self.entry_bb40_bbdelta_close_3.value) & dataframe['closedelta'].gt(dataframe['close'] * self.entry_bb40_closedelta_close_3.value) & dataframe['tail'].lt(dataframe['bbdelta'] * self.entry_bb40_tail_bbdelta_3.value) & dataframe['close'].lt(dataframe['lower'].shift()) & dataframe['close'].le(dataframe['close'].shift()) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_4_enable.value & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & dataframe['safe_dips_strict'] & dataframe['safe_pump_24_1h'] & (dataframe['close'] < dataframe['ema_50']) & (dataframe['close'] < self.entry_bb20_close_bblowerband_4.value * dataframe['bb_lowerband']) & (dataframe['volume'] < dataframe['volume_mean_30'].shift(1) * self.entry_bb20_volume_4.value)) conditions.append(self.entry_condition_5_enable.value & (dataframe['ema_100'] > dataframe['ema_200']) & (dataframe['close'] > dataframe['ema_200_1h'] * self.entry_ema_rel_5.value) & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & dataframe['safe_dips'] & dataframe['safe_pump_36_strict_1h'] & (dataframe['volume_mean_4'] * self.entry_volume_5.value > dataframe['volume']) & (dataframe['ema_26'] > dataframe['ema_12']) & (dataframe['ema_26'] - dataframe['ema_12'] > dataframe['open'] * self.entry_ema_open_mult_5.value) & (dataframe['ema_26'].shift() - dataframe['ema_12'].shift() > dataframe['open'] / 100) & (dataframe['close'] < dataframe['bb_lowerband'] * self.entry_bb_offset_5.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_6_enable.value & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & dataframe['safe_dips_strict'] & (dataframe['volume'].rolling(4).mean() * self.entry_volume_6.value > dataframe['volume']) & (dataframe['ema_26'] > dataframe['ema_12']) & (dataframe['ema_26'] - dataframe['ema_12'] > dataframe['open'] * self.entry_ema_open_mult_6.value) & (dataframe['ema_26'].shift() - dataframe['ema_12'].shift() > dataframe['open'] / 100) & (dataframe['close'] < dataframe['bb_lowerband'] * self.entry_bb_offset_6.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_7_enable.value & (dataframe['ema_100'] > dataframe['ema_200']) & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & dataframe['safe_dips'] & (dataframe['volume'].rolling(4).mean() * self.entry_volume_6.value > dataframe['volume']) & (dataframe['ema_26'] > dataframe['ema_12']) & (dataframe['ema_26'] - dataframe['ema_12'] > dataframe['open'] * self.entry_ema_open_mult_7.value) & (dataframe['ema_26'].shift() - dataframe['ema_12'].shift() > dataframe['open'] / 100) & (dataframe['rsi'] < self.entry_rsi_7.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_8_enable.value & (dataframe['close'] > dataframe['ema_200_1h'] * self.entry_ema_rel_8.value) & (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(24)) & (dataframe['close'] > dataframe['open']) & (dataframe['close'] > dataframe['smma_lips']) & (dataframe['smma_lips'] > dataframe['smma_teeth']) & (dataframe['smma_teeth'] > dataframe['smma_jaw']) & (dataframe['smma_lips'].shift(1) > dataframe['smma_teeth'].shift(1)) & (dataframe['smma_teeth'].shift(1) > dataframe['smma_jaw'].shift(1)) & (dataframe['smma_lips'] > dataframe['smma_lips'].shift(1)) & (dataframe['smma_teeth'] > dataframe['smma_teeth'].shift(1)) & (dataframe['smma_jaw'] > dataframe['smma_jaw'].shift(1)) & (dataframe['rsi'] < self.entry_rsi_8.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_9_enable.value & (dataframe['ema_50'] > dataframe['ema_200']) & (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & dataframe['safe_dips_strict'] & (dataframe['volume_mean_4'] * self.entry_volume_9.value > dataframe['volume']) & (dataframe['close'] < dataframe['sma_30'] * self.entry_ma_offset_9.value) & (dataframe['close'] < dataframe['bb_lowerband'] * self.entry_bb_offset_9.value) & (dataframe['rsi_1h'] > self.entry_rsi_1h_min_9.value) & (dataframe['rsi_1h'] < self.entry_rsi_1h_max_9.value) & (dataframe['mfi'] < self.entry_mfi_9.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_10_enable.value & (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(24)) & dataframe['safe_dips'] & dataframe['safe_pump_24_1h'] & (dataframe['volume_mean_4'] * self.entry_volume_10.value > dataframe['volume']) & (dataframe['close'] < dataframe['sma_30'] * self.entry_ma_offset_10.value) & (dataframe['close'] < dataframe['bb_lowerband'] * self.entry_bb_offset_10.value) & (dataframe['rsi_1h'] < self.entry_rsi_1h_10.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_11_enable.value & (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & dataframe['safe_pump_24_1h'] & ((dataframe['close'] - dataframe['open'].rolling(36).min()) / dataframe['open'].rolling(36).min() > self.entry_min_inc_11.value) & (dataframe['close'] < dataframe['sma_30'] * self.entry_ma_offset_11.value) & (dataframe['rsi_1h'] > self.entry_rsi_1h_min_11.value) & (dataframe['rsi_1h'] < self.entry_rsi_1h_max_11.value) & (dataframe['rsi'] < self.entry_rsi_11.value) & (dataframe['mfi'] < self.entry_mfi_11.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_12_enable.value & (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(24)) & dataframe['safe_dips_strict'] & dataframe['safe_pump_24_strict_1h'] & (dataframe['volume_mean_4'] * self.entry_volume_12.value > dataframe['volume']) & (dataframe['close'] < dataframe['sma_30'] * self.entry_ma_offset_12.value) & (dataframe['ewo'] > self.entry_ewo_12.value) & (dataframe['rsi'] < self.entry_rsi_12.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_13_enable.value & (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(24)) & dataframe['safe_dips_strict'] & dataframe['safe_pump_24_strict_1h'] & (dataframe['close'] < dataframe['sma_30'] * self.entry_ma_offset_13.value) & (dataframe['ewo'] < self.entry_ewo_13.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_14_enable.value & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & (dataframe['sma_200'] > dataframe['sma_200'].shift(20)) & dataframe['safe_dips_strict'] & dataframe['safe_pump_48_1h'] & (dataframe['volume_mean_4'] * self.entry_volume_14.value > dataframe['volume']) & (dataframe['ema_26'] > dataframe['ema_12']) & (dataframe['ema_26'] - dataframe['ema_12'] > dataframe['open'] * self.entry_ema_open_mult_14.value) & (dataframe['ema_26'].shift() - dataframe['ema_12'].shift() > dataframe['open'] / 100) & (dataframe['close'] < dataframe['bb_lowerband'] * self.entry_bb_offset_14.value) & (dataframe['close'] < dataframe['sma_30'] * self.entry_ma_offset_14.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_15_enable.value & (dataframe['close'] > dataframe['ema_200_1h'] * self.entry_ema_rel_15.value) & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & dataframe['safe_dips_strict'] & (dataframe['ema_26'] > dataframe['ema_12']) & (dataframe['ema_26'] - dataframe['ema_12'] > dataframe['open'] * self.entry_ema_open_mult_15.value) & (dataframe['ema_26'].shift() - dataframe['ema_12'].shift() > dataframe['open'] / 100) & (dataframe['rsi'] < self.entry_rsi_15.value) & (dataframe['close'] < dataframe['sma_30'] * self.entry_ma_offset_15.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_16_enable.value & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & dataframe['safe_dips_strict'] & dataframe['safe_pump_24_strict_1h'] & (dataframe['volume_mean_4'] * self.entry_volume_16.value > dataframe['volume']) & (dataframe['close'] < dataframe['ema_20'] * self.entry_ma_offset_16.value) & (dataframe['ewo'] > self.entry_ewo_16.value) & (dataframe['rsi'] < self.entry_rsi_16.value) & (dataframe['volume'] > 0)) conditions.append(self.entry_condition_17_enable.value & dataframe['safe_dips_strict'] & (dataframe['close'] < dataframe['ema_20'] * self.entry_ma_offset_17.value) & (dataframe['ewo'] < self.entry_ewo_17.value) & (dataframe['volume'] > 0)) if conditions: dataframe.loc[reduce(lambda x, y: x | y, conditions), 'enter_long'] = 1 return dataframe def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame: conditions = [] conditions.append(self.exit_condition_1_enable.value & (dataframe['rsi'] > self.exit_rsi_bb_1.value) & (dataframe['close'] > dataframe['bb_upperband']) & (dataframe['close'].shift(1) > dataframe['bb_upperband'].shift(1)) & (dataframe['close'].shift(2) > dataframe['bb_upperband'].shift(2)) & (dataframe['close'].shift(3) > dataframe['bb_upperband'].shift(3)) & (dataframe['close'].shift(4) > dataframe['bb_upperband'].shift(4)) & (dataframe['close'].shift(5) > dataframe['bb_upperband'].shift(5)) & (dataframe['volume'] > 0)) conditions.append(self.exit_condition_2_enable.value & (dataframe['rsi'] > self.exit_rsi_bb_2.value) & (dataframe['close'] > dataframe['bb_upperband']) & (dataframe['close'].shift(1) > dataframe['bb_upperband'].shift(1)) & (dataframe['close'].shift(2) > dataframe['bb_upperband'].shift(2)) & (dataframe['volume'] > 0)) conditions.append(self.exit_condition_3_enable.value & (dataframe['rsi'] > self.exit_rsi_main_3.value) & (dataframe['volume'] > 0)) conditions.append(self.exit_condition_4_enable.value & (dataframe['rsi'] > self.exit_dual_rsi_rsi_4.value) & (dataframe['rsi_1h'] > self.exit_dual_rsi_rsi_1h_4.value) & (dataframe['volume'] > 0)) conditions.append(self.exit_condition_5_enable.value & (dataframe['close'] < dataframe['ema_200']) & ((dataframe['ema_200'] - dataframe['close']) / dataframe['close'] < self.exit_ema_relative_5.value) & (dataframe['rsi'] > dataframe['rsi_1h'] + self.exit_rsi_diff_5.value) & (dataframe['volume'] > 0)) conditions.append(self.exit_condition_6_enable.value & (dataframe['close'] < dataframe['ema_200']) & (dataframe['close'] > dataframe['ema_50']) & (dataframe['rsi'] > self.exit_rsi_under_6.value) & (dataframe['volume'] > 0)) conditions.append(self.exit_condition_7_enable.value & (dataframe['rsi_1h'] > self.exit_rsi_1h_7.value) & qtpylib.crossed_below(dataframe['ema_12'], dataframe['ema_26']) & (dataframe['volume'] > 0)) conditions.append(self.exit_condition_8_enable.value & (dataframe['close'] > dataframe['bb_upperband_1h'] * self.exit_bb_relative_8.value) & (dataframe['volume'] > 0)) if conditions: dataframe.loc[reduce(lambda x, y: x | y, conditions), 'exit_long'] = 1 return dataframe # Elliot Wave Oscillator def EWO(dataframe, sma1_length=5, sma2_length=35): df = dataframe.copy() sma1 = ta.EMA(df, timeperiod=sma1_length) sma2 = ta.EMA(df, timeperiod=sma2_length) smadif = (sma1 - sma2) / df['close'] * 100 return smadif